# Algorithms for location problems based on angular distances.

1. IntroductionGenerally, the purpose of a location problem is to determine locations of one or several new facilities on a plane or in a space where some objects (facilities) have been already-placed [1]. Usually, the number of possible arrangements for new facilities is infinite [2].

Location problems occur frequently in real life. Some of them include the distribution systems such as locating warehouses within supply chain to minimize average transportation time to market, locating hazardous material so as to minimize its exposure to the public, determining bank account and lockboxes location to maximize clearing time or float, and problems of locating a computer, telecommunication equipment, and wireless base stations [3]. Many of such practical problems of this kind involve emergency facilities such as hospitals, fire stations, accident rescue, or civil defense. The usual objective here is to minimize the maximum among weighted distances between facilities to be located and all demand points. Details of other useful applications can be found in [4, 5]. Similar problems are formulated in approximation theory, problems of estimation in statistics [6], signal and image processing, and so forth [79].

Distance is the length of the shortest path between two points. However, the path depends on properties of space and a way of movement in it. In continuous spaces, the most commonly used metrics are rectangular or Manhattan ([l.sub.1]), Euclidean ([l.sub.2]), and Tchebychev ([l.sub.[infinity]]). Indeed, many results have been generalized for n-dimensional space; however, practical applications usually occur within the context of two-dimensional and three-dimensional spaces. Therefore, in the subsequent sections, DPF is used for modeling distances in 2-dimensional space (unless it is otherwise stated).

The Euclidean distance between two points does not reflect the cost of moving between them in the systems which use rotating mechanisms (telescopic boom, etc.) as transportation means. These systems include automated lifting cranes and manipulators.

This kind of problems lies behind many important applications. Unfortunately, there exist only a few algorithms which can guarantee optimality.

This paper therefore intends to describe challenging DPFs that are less exploited in the location problem, in addition to describing their similarities for new developments in location research.

The paper is organized as follows. An overview of various distance metrics and location optimization algorithms is given in Section 2. Section 3 describes four versions of the mathematical distance functions which cause the objective functions to differ significantly from those that have been exploited so far. In addition, Section 3 features the relationship among the enumerated metrics. Sections 4-6 describe algorithms for solving location problems with the listed distance predicting functions. In Section 7, we present a numerical example.

2. Preliminaries

Models involving various DPFs may occur in emergency situations. For instance, the model proposed in [10] calculates the response time between the fire calls and arrival of fire engines. In [11], DPF was presented to be of value in farming activities. Some of the circumstances discussed include planning an irrigation channel between a pond and a field as well as calculating distances among different geographic regions. With the increasing importance of geographic information systems (GIS), a DPF may be incorporated into a GIS to calculate distance measurements in geographic regions.

Westwood [12] has considered optimal mix of trucking and tramping of a truck transportation network for the movement of goods and raw materials among distributing centers, depots, and producers, utilizing a DPF. In some distribution problems, only the general locations and demands of customers are known. A DPF maybe employed to estimate the expected travel distance.

DPF is necessary for the estimation of actual distances between the new and existing facilities [13-15]. The most widely used measure of distance between a facility and a customer is the [l.sub.p] metric which defines the distance between two points X = ([x.sub.1], ..., [x.sub.N]) and Y = ([y.sub.1], ..., [y.sub.N]) in an N dimensional space by

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1)

In the case p = 1, the [l.sub.p] distance is the rectilinear (rectangular) distance, while in the case p = 2 it reduces to the usual Euclidean distance. The two cases above and the Tchebychev norm (p = +[infinity]) [16] are the most widely used within the [l.sub.p] metrics so far [17].

The straight-line Euclidean distance model (p = 2) is not applicable in cases such as street travel in a city where each travel follows a grid pattern. The appropriate distance function which calculates the distance in this situation is the rectangular distance function (p = 1).

There exist several well-documented location problems based upon the assumption of a planar model. For instance, the most famous is the classical Weber problem where a single facility X [member of] [R.sup.2] is to be located such that the weighted sum of distances between new and existing facilities is minimized as follows:

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (2)

Here, [w.sub.i], i = [bar.1,m] are a nonnegative weighting coefficients for m facilities and [A.sub.i] = ([a.sup.i.sub.1], [a.sup.i.sub.1]), i = [bar.1,m] are coordinates of the existing facilities. Also, [parallel] * [parallel] is the Euclidean distance which corresponds to a classical Weber problem.

The choice of distance functions is an important factor in location model representation. The [l.sub.p] metrics have received the most attention from location analysts. However, many other types of distances have been exploited in the facility location problems. A review of metrics exploited in many variations of location problems includes central metrics [18], weighted one-infinity norm [19], mixed distances [20, 21], continuous and network distances [22-24], various round and block norms [11, 25], and location problems on a sphere and arbitrary surface [9, 26].

Very little has been done to include special cases of the class of metrics in location models. Spath [27] introduced Jaccard metric in minisum problem while in the research of [28], using Jaccard metric and Jaccard median was reported to be of value for classification and other problems in scientific fields such as biology, botany, psychology, paleontology, cognitive sciences, and computer science. A finite descent algorithm for the solution of minisum problem with Jaccard metric was developed in [29].

Some of recent efforts in this direction are those presented in [16] for facility location models where the cities have road networks with streets that are either straight line emanating from a fixed center or straight lines through the central point. Also road networks with only one main street and the other crossing it at right angles were suggested in [30].

Moscow metric or Moscow-Karlsruhe metric, considered in this paper, was used in [31] based on its applicability in the construction of Voronoi diagram on [R.sup.2] for cities similar to Karlsruhe.

Many authors proposed approximate approaches to the location problems with various or arbitrary distance functions [8, 26]. Such approaches transform the problem into a discrete location problem [32]. However, methods for discrete location problems take many computational resources [32, 33] with no guarantee of the appropriate precision of the result.

In [30], investigation was carried out on the Weber problem in the plane, under the assumption that the distance function is measured with the lift metric. The proposed algorithm for finding the optimal solution is based on known algorithm with underlying rectilinear distances. Authors [34] further considered French metro metric as the underlying in the minisum problem. The transformation of the considered Weber problem is reduced to the analogous optimization problem based on rectangular distances using polar coordinates. The algorithm stated in [34] is applied on the optimal location of the office of the delivery service in the subway of the city Novosibirsk, Russia. In this paper, the British Rail metric [35] which assumes that any path between two points includes the central point (origin) was considered.

3. Location Problems with Metrics Based on Angular Distances

For the sake of motivation, let us consider an example illustrated in Figure 1. A crane or other manipulator on a static platform (denoted by 1) has a rotating boom (2) with a mobile lifting mechanism (3) moving along the boom. The whole structure has three degrees of freedom: the height h of the hook (4), the rotation angle [phi], and the position of the lifting mechanism on the boom r (radius).

Polar or cylindrical coordinate system [36] is useful to describe the position and movement of the hook of the crane or manipulator. The origin of the coordinates must coincide with the axis of rotation of the boom.

The following notations are used below. Any point Y = ([y.sub.r], [y.sub.[phi]], [y.sub.h]) in our coordinate system is described with 3 coordinates: height [y.sub.h], radius [y.sub.r], and angle [y.sub.[phi]] Radius [y.sub.r] is the Euclidean distance between the point Y and the axis of rotation; height [y.sub.h] is the distance between Y and a surface perpendicular to the axis. The following equations can be used to convert the Cartesian coordinates of a point Y = ([y.sub.1], [y.sub.2]) on a plane into polar coordinates:

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (3)

In a 3D space, for Y = ([y.sub.1], [y.sub.2], [y.sub.3]), an additional coordinate [y.sub.h] = [y.sub.3] is added.

If the mechanism transfers a load from a point A = ([a.sub.r], [a.sub.[phi]], [a.sub.h]) to a point B = ([b.sub.r], [b.sub.[phi]], [b.sub.h]) then it spends some energy to change the height for the value [DELTA]h = [absolute value of [a.sub.h] - [b.sub.h]], to modify the angle for

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII] (4)

and the position of the lifting mechanism (radius) for [DELTA]r = [absolute value of [a.sub.r] - [b.sub.r]].

In some region accessible by the manipulator (h < H, r < R, where H is the height of the crane, R is the effective length of the boom), there is a set of m points (customers) [A.sub.i], i = 1, ..., m. Arbitrary ith point [A.sub.i] = ([a.sup.i.sub.r], [a.sup.i.sub.[phi]], [a.sup.i.sub.h]) is required to deliver a [w.sub.i] cargo pallets with some freight (building materials, e.g.). The location problem searches for a point X = ([x.sup.i.sub.r], [x.sup.i.sub.[phi]], [x.sup.i.sub.h]) such that the cost of placing the whole volume of freight reaches its minimum. In general, the problem is to find appropriate point X from the following minimization problem:

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (5)

Here, [w.sub.i], i = [bar.1,m] are nonnegative weighting coefficients, and L(X,[A.sub.i]) is the distance function which determines the cost of moving goods from the point X to the point [A.sub.i]. The classical Weber problem with the underlying Euclidean metric assumes the Euclidean distance L(X, [A.sub.i]) = [[parallel]X - [A.sub.i][parallel].sub.2]. However, expenses (energy, time, etc.) of mechanism are not proportional to Euclidean distance. Four strategies for manipulator control and four corresponding location problems depending on the method of calculating these expenses are formulated.

Strategy 1. Minimize the cost of the mechanism movement. If the cost of moving the hook vertically for 1m is [C.sub.h] the cost of the boom rotation is [C.sub.[phi]] for 1 radian and the cost of the lifting mechanism movement along the boom (radius change) is [C.sub.r] for 1m. Then the distance between X and A; is defined by

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (6)

and the objective function from (5) is

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (7)

Then the term lifting crane metric can be used to denote the distance function (6). The Weber problem corresponding to the objective function (7) was described in [37].

Strategy 2. Minimize the length of freight path provided only one type of movement (vertical movement, boom rotation, or radius change) is allowed to be performed in a single unit of time. Under this assumption, we have a mixed norm considered in [21]:

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (8)

The vertical component of the path [absolute value of [x.sub.h] - [a.sup.i.sub.h]] is independent of other components. The length of the horizontal component is the distance in Karlsruhe (Moscow) metric [35].

Urban planning in cities of Moscow or Karlsruhe includes streets of two types: "rays" from the center and disjoint "road rings" around the center. There exists three ways for transition from point A; to point X:

(1) moving along a "ring" street from A; and then moving along a "ray" up to X (Case A in Figure 2). This path is optimal if [phi] = [[delta].sub.[phi]] ([a.sup.i.sub.[phi]], [x.sub.[phi]) [less than or equal to] 2 and [x.sub.r] [greater than or equal to] [a.sup.i.sub.r];

(2) moving along a "ray" from A; and then moving along a "ring" street up to X (Case B in Figure 2). This path is the shortest if [phi] = [[delta].sub.[phi]] ([a.sup.i.sub.[phi]], [x.sub.[phi]) [less than or equal to] 2 and [x.sub.r] [greater than or equal to] [a.sup.i.sub.r];

(3) moving from A; along a "ray" up to the origin (center of the city), then along some other "ray" from the center to X if [phi] = [[delta].sub.[phi]] ([a.sup.i.sub.[phi]], [x.sub.[phi]) [greater than or equal to] 2 (see Case C in Figure 2). This case coincides with the French metro metric [34].

Strategy 3. Minimize the length of the path of the hook under assumption that the rotation is allowed with zero spread of the lifting mechanism only (when the boom is shortened). If the demand point is unreachable from the current point without rotating the boom then the spread of the lifting mechanism must be shortened first (a load moves to the origin), the boom rotates and then the spread of the lifting mechanism increases to reach the demand point. This assumption is actual for some manipulators with a telescopic boom. For such kind of manipulators, the vertical movement is impossible or allowed to be performed by rotating the boom in a vertical plane (changing the azimuth). For the simplicity, a 2D case is here considered:

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (9)

Strategy 4. This strategy is quite similar to the previous one, except for one important condition. The load moves to the zero point in any case, no matter whether the rotation of the boom is required or not, so that the distance between X and A; is defined by

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (10)

In case of Strategy 4, the distance function for the working part of the manipulator can be described by British Rail metric (flower shop metric) [35], with considering an axis of rotation as the origin. Distance function in Strategy 3 corresponds to the French metro metric with polar coordinates. Algorithm for this case is considered in [34, 38]. This method is further developed and described in [39]. Algorithms for lifting crane metric (Strategy 1), Moscow-Karlsruhe metric (Strategy 2), and British Rail metric (Strategy 4) are shown in the subsequent sections.

4. Algorithm for the "Lifting Crane" Metric (Strategy 1)

The distance function between points A; = ([a.sup.i.sub.1], [a.sup.i.sub.2], [a.sup.i.sub.3]) and X = ([x.sub.1],[x.sub.2], [x.sub.3]) in rectangular coordinates is defined by the following expression:

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (11)

The optimization problem (5) based on the goal function (11) splits into three independent problems with objective functions:

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (12)

Both problems can be reduced on the sequential application of a more general function (in (12)) on the sequential application of a more general problem with the following objective function:

f(x) = [m.summation over (i=1)] [w.sub.i][absolute value of x - [a.sup.i]]. (13)

The problem (13) can be solved using known algorithm (see, e.g., [1, 40]).

In case of Strategy 1 (see Section 3), the objective function (7) is the sum of three independent functions:

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (14)

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (15)

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (16)

Solution of the problem (7) is a point [X.sup.*] = ([x.sup.*.sub.r], [x.sup.*.sub.[phi]], [x.sup.i.sub.h]) whose coordinates ([x.sup.*.sub.r], [x.sup.*.sub.[phi]], and [x.sup.*.sub.h]) are solutions (minimizers) of functions (14), (15), and (16), respectively. Furthermore, it can easily be observed that problems 14) and 16) correspond to the generalized problem (13) and they can be solved by the appropriate algorithm proposed in [1, 40].

Lemma 5. Let X be a set of all minimizers of the objective function (15) and [A.sub.[phi]] = ([a.sup.1.sub.[phi]], ..., [a.sup.m.sub.[phi]]) be the set of angular coordinates of the existingfacilities (demand points). Then there exists [a.sup.i.sub.[phi]] [member of] [A.sub.[phi]] such that [a.sup.i.sub.[phi]] [member of] X or ([a.sup.i.sub.[phi]] + [phi]) [member of] X.

Proof. Let [x.sup.*.sub.[phi]] [member of] X be a minimizer of the function (15) and

[x.sup.*.sub.[phi]] = [a.sup.i.sub.[phi]] + [pi] [for all] = [bar.1,m], K [member of] {0,1}. (17)

Then we turn to the polar coordinate system such that [x.sup.*.sub.[phi]] = 0 (Figure 3) and we assume that values of all angles satisfy -[pi] < [a.sup.i.sub.[phi]] [less than or equal to] [pi] (the case [a.sup.i.sub.[phi]] = 0 is excluded since [x.sup.*.sub.[phi]] [not equal to] [a.sup.i.sub.[phi]]). This transformation is possible since [x.sup.*.sub.[phi]] + K[pi] can be subtracted from values of all angles [a.sup.i.sub.[phi]] as well as from [x.sup.*.sub.[phi]] itself, regardless of any choice of [x.sup.i.sub.[phi]]. The values of the function [[delta].sub.[phi]]([a.sup.i.sub.[phi]], [x.sub.[phi]]) = [min.sub.K[member of]Z] [absolute value of [x.sub.[phi]] - [a.sup.i.sub.[phi]] - 2K[phi]] remain unchanged in the new coordinate system. Therefore, the values of the objective function (15) are unchanged.

Splitting the set of indices of coordinates {[a.sup.i.sub.[phi]]} into two subsets:

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (18)

Then

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (19)

If [Q.sub.+] = 0 then [f.sub.[phi]]([x.sup.*.sub.[phi]) = - ([summation].sup.m.sup.i=1] [w.sub.i][a.sup.i.sub.[phi]].

Since [a.sup.i.sub.[phi]] < 0 [for all]i [member of] Q_ and [[delta].sub.[phi]] ([a.sup.i.sub.[phi]], [a.sup.i'.sub.[phi]]) [less than or equal to] [pi] [for all]i, i' [member of] Q_, it follows that

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (20)

Since [a.sup.i.sub.[phi]] = 0 [for all] = [bar.1,m], it results in [absolute value of [a.sup.i.sub.[phi]] - [a.sup.1.sub.[phi]]] < [absolute value of [a.sup.i.sub.[phi]] 0] [for all]i = [bar.1,m] that is, [[delta].sub.[phi]]([a.sup.i.sub.[phi]], [a.sup.i.sub.[phi]]) < [[delta].sub.[phi]]([a.sup.i.sub.[phi]], [a.sup.i.sub.[phi]])). Further, since [w.sub.i] [less than or equal to] 0 [for all]i = 1, m, if [there exists]i : [w.sub.i] > 0 then [f.sub.[phi]]([a.sup.1.sub.[phi]) < [f.sub.[phi]]([x.sub.phi]).

If [w.sub.i] = 0 [for all]i [member of] [bar.{1,m}] then [f.sub.[phi]]([x.sub.[phi]) = 0 [for all][x.sub.[phi]] [member of R and [a.sup.i.sub.[phi]] [member of] X[for all]i = [bar.1,m].

Thus, if [Q.sub.+] = 0 then [x*.sub.[phi]] is not a minimizer of the objective function (15) unless all values [a.sup.i.sub.[phi]] are its minimizers.

Similarly, it can be proved that if Q_ = 0 then [x.sup.*.sub.[phi]] is not a minimizer of (15) unless all values [a*.sub.[phi]] are its minimizers.

Thus, if [[x.sup.*.sub.[phi]] is a minimizer of the objective (15) and all values [[a.sup.i.sub.[phi]] are not its minimizers then both subsets [Q.sub.-] and [Q.sub.+] are nonempty.

We choose four indices, two for each of the subsets [Q.sub.-] and [Q.sub.+] (indices can coincide if the subset contains an index of a single point):

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (21)

Then it is possible to choose an arbitrary value [x'.sub.[phi]], provided that

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (22)

In this case, L([X', [A.sub.i]) = [a.sup.i.sub.[phi]] - [x'.sub.[phi]] [for all]i [member of] [Q.sub.+] and L([X', [A.sub.i]) = -[a.sup.i.sub.[phi]] + [x'.sub.[phi]] [for all]i [member of] [Q.sub.-].

Thus, for each

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (23)

the value of the objective function in (15) is equal to

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (24)

Here,

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (25)

For [x.sup.*.sub.[phi]] = 0 it follows that f([x.sup.*.sub.[phi]]) = [C.sub.0].

If [DELTA]W > 0 then for [x".sub.[phi]] to satisfy

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII] (26)

the following holds:

[f.sub.[phi]]([x".sub.[phi]]) = [C.sub.0] + [DELTA][x".sub.[phi]] < [f.sub.[phi]]([x.sup.*.sub.[phi]]). (27)

This means that [[x.sup.*].sub.[phi]] is not a minimizer of (15). Similarly, if [DELTA]W > 0 then, for [x".sub.[phi]] satisfying

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (28)

the following expression below is obtained:

[f.sub.[phi]]([x".sub.[phi]]) = [C.sub.0] + [DELTA]W[x".sub.[phi]] < [f.sub.[phi]]([x.sup.*.sub.[phi]]). (29)

If [DELTA]W > 0 then for [x".sub.[phi]] which satisfies

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII] (30)

it follows that

[f.sub.[phi]]([x".sub.[phi]]) = [C.sub.0] + [DELTAW][x".sub.[phi]] < [f.sub.[phi]]([x.sup.*.sub.[phi]]). (31)

Thus, in this case [x*.sub.[phi] is a minimizer, so the same is valid for all points inside the interval including the boundary points [MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII].

Value [x.sup.*.sub.[phi]] is chosen arbitrarily. Thus, if [x.sup.*.sub.[phi]] = [a.sup.i.sub.[phi]] + K[pi] [phi]i = [bar.(1,m)], K [member of] Z, then [x.sup.*.sub.[phi]] is not a minimizer of the objective function except for the case [DELTA]W = 0. In this case, values max ([MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]) and min ([MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]) are its minimizers either. Values, and are selected from one of three sets: [MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. Let us assume that the angles [MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII] and [MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII] are equivalent and give identical values of the objective function.

Thus, if we are required to find any minimizer of [f.sub.[phi]] ([f.sub.[phi]]), two sets have to be sought: {[a.sup.i.sub.[phi]] | i = [bar.1,m]} and {[a.sup.i.sub.[phi]] [phi] | i = [bar.1,m]}. Algorithm 6 is offered for solving this problem.

Algorithm 6. Solving the location problem with the "lifting crane" metric.

Step 1. Solve the problem 14) using algorithm for 13). Store the result to [x*.sub.r].

Step 2. Solve the problem 16) using algorithm for 13). Store the result to [x*.sub.r].

Step 3. If [f.sub.[phi]]([a.sup.1.sub.[phi]] + [pi]) < [f.sub.[phi]]([a.sup.1.sub.[phi]]) then [x.sup.*.sub.[phi]] = = [a.sup.1.sub.[phi]] + [pi] else [x.sup.*.sub.[phi]] = [a.sup.1.sub.[phi]].

Step 4. f = [f.sub.[phi]]([x.sup.*.sub.[phi]]).

Step 5. For each i : i = [bar.2,m] perform the cycle.

Step 5.1 If [f.sub.[phi]]([a.sup.1.sub.[phi]]) < f then [x.sup.*.sub.[phi]] = [a.sup.i.sub.[phi]]; [f.sup.*] = [f.sub.[phi]]([a.sup.i.sub.[phi]).

Step 5.2 If [f.sub.[phi]]([a.sup.1.sub.[phi]] + [pi]) < f then [x.sup.*.sub.[phi]] = [a.sup.i.sub.[phi]]) + [pi]; [f.sup.*] = [f.sub.[phi]]([a.sup.i.sub.[phi] + [pi])

Step 5.3. End of cycle 5.

Step 6. Displaytheresult [X.sup.*] = ([[x.sup.*.sub.r], [x.sup.*.sub.[phi]], [x.sup.*.sub.h]). STOP.

Let us estimate the computational complexity of Algorithm 6. Let m be a number of existing facilities (demand points). The algorithm for the [l.sub.1] metric ([1, 40]) includes coordinates sorting in ascending order with the asymptotic complexity of O(m log m) and summation of coordinate values with linear complexity. Thus, the general computational complexity of steps 1 and 2 is described by the asymptotic formula O(m log m). Steps 5-5.3 define a cycle in which values of the objective function are calculated for each of m - 1 coordinates [a.sup.i.sub.[phi]] and [a.sup.i.sub.[phi]] + [pi]. Based on Steps 3 and 4, the objective function is estimated 2m times. The objective function is linear (asymptotic complexity O(m)), so the asymptotic complexity of Steps 3-5.3 and complete Algorithm 6 is equal to O([m.sup.2]).

5. Algorithm for Moscow-Karlsruhe Metric (Strategy 2)

In the case of Strategy 2, defined in Section 3, the objective function of the Weber problem (5) is the sum

F(x) = [f.sub.h]([x.sub.h]) + [f.sub.MK]([x.sub.r] > [x.sub.[phi]]) (32) of two independent functions

[f.sub.h](X) = [m.summation over (i=1)] [w.sub.i][absolute value of [x.sub.h] - [a.sup.i.sub.h]]. (33)

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (34)

Minimum of the goal function (32) is achieved in a point [X.sup.*] = [x.sup.*.sub.[phi]], [x.sup.*.sub.h]), where [x.sup.*.sub.h] is a minimum point of the objective (33), and [x.sup.*.sub.[phi] and [x.sup.*.sub.r] are minimizers of (34). So, problem (32) corresponds to the generalized problem (13). It can be solved by the appropriate algorithm from [1, 40, 41].

Lemma 7 provides a solution of the location problem with the objective function (34).

Lemma 7. Let X be a set of minimizers of the objective function (34) and A = {[A.sub.1], ..., [A.sub.m]] be the set of the polar coordinate pairs of the existing facilities (demand points) [A.sub.i] = ([a.sup.i.sub.r], [a.sup.i.sub.[phi]]).

Then there exist [X.sup.*] = ([x.sup.*.sub.r], [x.sub.*.sub.[phi]]) [member of] X and [A.sub.i] = ([a.sup.i.sub.r], [a.sup.i.sub.[phi]]) [member of] A such that at least one of the following three conditions is correct:

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII].

Proof. Assume that the minimize [X.sup.*] =([x.sup.i.sub.h], [x.sup.*.sub.[phi]]) of the function (34) satisfies [x.sup.*.sub.[phi]] [not equal to] [a.sup.i.sub.[phi]] [+ or -] 2 [for all]i = [bar.1,m]. Turning to the polar coordinate system with [x.sup.*.sub.[phi]] = 0 (Figure 4), values of all angles [a.sup.i.sub.[phi]] are expressed so that -[pi] < [a.sup.i.sub.[phi]] < [pi] (the case [a.sup.i.sub.[phi]] = 0 is excluded since [x.sup.*.sub.[phi]] [not equal to] [a.sup.i.sub.[phi]]). This transformation is possible because, regardless of the choice of [x.sup.*.sub.[phi]], we can subtract [x.sup.*.sub.[phi]] from values of all angles [a.sup.*.sub.[phi]] and from the angle [x.sup.*.sub.[phi]] itself and obtain values of new coordinates. Values [[delta].sub.[phi]]([a.sup.i.sub.[phi]], [x.sub.[phi]]) = [min.sub.K[memberof of]Z]] {[absolute value of [x.sub.[phi]] - [x.sub.[phi]] - 2[pi]K]} remain the same in the new coordinate system.

Therefore, value of the objective function (34) remains unchanged.

Let us divide the set of indices included in coordinates {[a.sup.i.sub.[phi]] | i = [bar.1,m]} into three subsets:

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (35)

In addition, consider the following three subsets of indices with respect to an arbitrary angle [x.sub.[phi]] [member of] (-[pi], [pi]]:

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (36)

Then

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (37)

The value of the objective function (34) at the point [x.sup.*.sub.[phi]] = 0 is equal to

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (38)

For an arbitrary angle [x.sub.[phi]] the following holds:

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII] (39)

There exists certain interval (Figure 4) [[x.sup.min.sub.[phi]], [x.sup.max.sub.[phi]] such that

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (40)

When [x.sub.[phi]] [member of] [[x.sup.min.sub.[phi]], [x.sup.max.sub.[phi]], some parts of (39), some parts of (39) are constant. It can be designated as follows:

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (41)

Objective function is linear for [x.sub.[phi]] [member of] [[x.sup.min.sub.[phi]], [x.sup.max.sub.[phi]], since

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII] (42)

implies

[f.sub.MK]([x.sup.*.sub.r], [x.sub.[phi]]) = [C.sub.0] + [DELTA]W[x.sub.[phi]] = [C.sub.0]. (43)

Consider the following three cases.

Case 1. [DELTA]W > 0. Choose [x'.sub.[phi]] satisfying [x.sup.min.sub.[phi]] < [x'.sub.[phi]] < [x'.sub.[phi]]. Thus,

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]; (44)

that is, [x'.sub.[phi]] is not a minimizer of the function (34).

Case 2. [DELTA]W < 0. Choose [x'.sub.[phi]] such that [x.sup.max.sub.[phi]] > [x'.sub.[phi]] > [x.sup.*.sub.[phi]]. Then,

[f.sub.MK]([x.sup.*.sub.r], [x.sub.[phi]]) = [C.sub.0] + [DELTA]W[x'.sub.[phi]] = [C.sub.0] [f.sub.MK]([x.sup.*.sub.r], [x.sup.*.sub.[phi]]), (45)

and [x'.sub.[phi]] also is not a minimizer of (34).

Case 3. [DELTA]W = 0. Then [f.sub.MK]([x.sup.*.sub.r], [x'.sub.[phi]]). In this case, if [x'.sub.[phi]], is a minimizer of the function (34), then [x.sup.*.sub.[phi]] is its minimizer too.

Let us estimate values of [x.sup.[min].sub.[phi]], [x.sup.[max].sub.[phi]].

From [a.sup.i.sub.[phi]] [member of] [Q.sub.+]([x.sub.[phi]]) [conjunction] [a.sup.i.sub.[phi]] [member of] [Q.sup.*.sub.+] [for all]i [member of] [bar.{1,m}] it is immediately obtained that 0 < [a.sup.i.sub.[phi]] - [x.sub.[phi]] [less than or equal to] 2 [for all]i [member of] [bar.{1,m}], which further implies 0 [x.sub.[phi]] [greater than or equal to] [a.sup.i.sub.[phi]] [for all]i [member of] [bar.{1,m}]. Finally, it is concluded that [MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII].

In the case, [a.sup.i.sub.[phi]] [member of] [Q.sub.-]([x.sub.[phi]) [conjunction] [a.sup.i.sub.[phi]] [member of] [Q.sub.*.sub.-] [for all]i [member of] [bar.{1,m}], it follows that 0 > [a.sup.i.sub.[phi]] - [x.sub.[phi]] [greater than or equal to] -2 [for all]i [member of] [bar.{1,m}], and further 0 < [x.sub.[phi]] [less than or equal to] [a.sup.i.sub.[phi]] + 2 [for all]o [member of] [bar.{1,m}]. Therefore, [MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII].

In the third case, [a.sup.i.sub.[phi]] [member of] [Q.sub.2]([x.sub.[phi]) [conjunction] [a.sup.i.sub.[phi]] [member of] [Q.sup.*.sub.2] [for all]i [member of] [for all]i [member of] [bar.{1,m}]. In a similar way [absolute value of [a.sup.i.sub.[phi]] - [x.sub.[phi]]] < 2 [for all]i [member of] [bar.{1,m}], and 0 [x.sub.[phi]] [less than or equal to] [a.sup.i.sub.[phi]] + 2 [disjunction] 0 > [x.sub.[phi]] [greater than or equal to] [a.sup.i.sub.[phi]] - 2 [for all]i [member of] [bar.{1,m}], which further implies [MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. Thus,

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (46)

In case [DELTA]W = 0, if [x.sup.*.[phi]] [not member of] {[a.sup.i.sub.[phi]} is a minimizer of (34), one of the values

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII] (47)

is also its minimize.

Assuming that [X.sup.*] = ([x.sup.*.sub.r], [x.sup.*.sub.[phi]]) is a minimizer of the function (34) and the value of [x.sup.[phi]] is known, then value of [x.sup.*.sub.r] can be calculated as follows.

Divide the set of indices of the existing facilities {[A.sub.i]} into two subsets defined by

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (48)

Then, the objective function (34) can be expressed as

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (49)

This can be designated with

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (50)

Then [MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII].

This function is piecewise linear (a linear spline). The boundaries of each of its intervals (subdomains) [a.sup.i.sub.r], i = [bar.1, m] are its possible minimizers. If the derivative of this function is equal to 0 for any given interval [[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]], then all points of the interval are possible minimizers of the objective (34) including the points [MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. Thus, for finding a minimizer of (34), it is sufficient to determine the value of this function on a set of points

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (51)

Cardinality of this set is [absolute value of [chi]] = 3[m.sup.2] + 1. A full search procedure can be used to find the minimizer.

Algorithm 8 is proposed for solving the minimization problem with the objective function (32)-(34).

Algorithm 8. Solve the location problem with Moscow Karlsruhe metric.

Step 1. Solve the problem (33) using the algorithm for (13). Store the result to [x.sup.*.sub.h].

Step 2. [x.sup.*.sub.[phi]] = 0; [x.sup.*.sub.r] = 0; [f.sup.*] = [f.sub.MK](0, 0).

Step 3. For each i : i = [bar.1,m] perform the following cycle.

Step 3.1. For each j : j = [bar.2,m] perform cycle.

Step 3.1.1. f = [f.sub.MK] ([a.sup.i.sub.r], [a.sup.i.sub.[phi]])

Step 3.1.2. If f < [f.sup.*] [x.sup.*.sub.r] = [a.sup.i.sub.r]; [x.sup.*.sub.r] = [a.sup.j.sub.[phi]]; [f.sup.*] = f.

Step 3.1.3. f = [f.sub.MK]([a.sup.i.sub.r], [a.sup.j.sub.[phi]] + 2).

Step 3.1.4. If f < [f.sup.*] then [a.sup.i.sub.r]; [x.sup.*.sub.r] = [a.sup.j.sub.[phi]] + 2; [f.sup.*] = f

Step 3.1.5. f = [f.sub.MK]([a.sup.i.sub.r], [a.sup.j.sub.[phi]] - 2).

Step 3.1.6. If f < [f.sup.*] then [x.sup.*.sub.r] = [a.sup.*.sub.r]; [x.sup.*.sub.[phi]] = [a.sup.j.sub.[phi]] - 2; [f.sup.*] = f.

Step 3.1.7. End of cycle 3.1.

Step 3.2. End of cycle 3.

Step 4. Display the result [X.sup.*] = ([x.sup.*.sub.r], [x.sup.*.sub.[phi]], [x.sup.*.sub.h]); Stop.

Estimate the computational complexity of Algorithm 8. Let m be a number of existing facilities (demand points). Step 1 of Algorithm 8 finds the solution of the Weber problem based on [l.sub.1] metric (see [1,40]). Therefore, it involves coordinates sorting in ascending order with the asymptotic complexity 0(m log m) as well as summation of coordinate values with linear complexity. Thus, the total computational complexity of Step 1 is described by the asymptotic formula 0(m log m). Steps 3-3.2 define a nested loop cycle in which the values of the objective function are calculated for each of the m values of coordinates and [a.sup.i.sub.[phi]] and [a.sup.i.sub.[phi]] [+ or -] 2. Based on Steps 3 and 4, the objective function is evaluated 1 + 3[m.sup.2] times. The objective function is linear (asymptotic complexity O(m)), so that the complexity of Steps 3-5.3 and complete Algorithm 8 is of the order O([m.sup.3]).

6. Algorithm for Location Problem with British Rail Metric

Lemma 9 is intended to shorten the set of possible facility locations (candidate solutions) in case of the Weber problem with underlying British Rail distance metric (which appears in Strategy 4).

Lemma 9. If

[not there exists] [member of] [bar.{1,m}]: [w.sub.i'] > [m.summation over (i=1)] [w.sub.i]/2 (52)

then the point O = (0,0) is a solution of the goal function (5) with distance function (10).

Proof. Assume [X.sup.*] = ([x.sub.r], [x.sub.[phi]]) is a solution of (5) with distance function (10). Here, we use polar coordinates. If [X.sup.*] [not equal to] [A.sub.i] = ([a.sup.i.sub.r], [a.sup.i.sub.[phi]]) [for all]i [member of] [bar.{1,m}] and [X.sup.*] [not equal to] (0, 0) then

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (53)

Compare this value with the value of the objective functions (5) and 10) in the point O:

F([X.sup.*] = [m.summation over (i=1)][w.sub.i][a.sup.i.sub.r] + [m.summation over (i=1)][w.sub.i][x.sup.*.sub.r]. (54)

Since [x*.sub.r] > 0, under the assumption [X.sup.*] [not equal to] (0,0) and [w.sub.i] [less than or equal to] 0 [for all]i = [bar.1,m], we get

F([X.sup.*] > F(O) (55)

and [X.sup.*] is not a minimizer of the objective unless

[X.sup.*] [member of] {O} [universal] {[A.sub.i] | i = [bar.1,m]} (56)

or

[w.sub.i] = 0 [for all]i = [bar.1,m]. (57)

If (57) holds, any point on the plane (including O) is a minimizer of the objective function.

Assuming [X.sup.* = [A.sub.i'] i' [member of] [bar.{1,m}] [X.sup.*] [not equal to] O = (0, 0)) then

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (58)

Thus, F([A.sub.i']) < F(O) if and only if

[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (59)

which was our original intention.

The result of Lemma 9 is perfectly consistent with the main result of the paper [42]. In [42], Chen proves that A t is the solution of the classical Weber problem with Euclidean metric if [there exists]' [member of] [bar.{1,m}] : [w.sub.i'] [greater than or equal to] [[summation].sup.m.sub.i=1] [w.sub.i]. It has been proved above that if this condition is not true in the case of British Rail metric, then the only possible solution is (0, 0).

Algorithm 10 is proposed.

Algorithm 10. Solve the location problem with British Rail metric.

Step 1. Compute W = [[summation].sup.m.sub.i = 1] [w.sub.i].

Step 2. For each i = [bar.1,m] perform the following: If [w.sub.i] [less than or equal to] W/2 then return [X.sup.*] = [A.sub.i]. STOP.

Step 3. Return the result [X.sup.*] = (0, 0). STOP.

Obviously, the asymptotic complexity of this algorithm is O(m) (linear).

7. Numerical Example

In this example, attempt is made at solving a location problem based on the "lifting crane" metric. Polar coordinates of the existing facilities (demand points) and the corresponding weighting coefficients are given in Table 1.

Solution

Step 1. [MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII].

Step 2. [MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII].

Step 3. [MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII].

Condition [f.sub.[phi]]([a.sup.1.sub.[phi]] + [pi]) = [f.sub.[phi]]([a.sup.1.sub.[phi]]) is not fulfilled, so that [x.sup.*.sub.[phi]] = [[phi].sup.1.sub.[phi]] = 0.

Step 4. f = [f.sub.[phi]]([x.sub.[phi]] = 1,25[pi].

Step 5. For each i = 2 to 5 perform cycle. Results of steps 5.15.3 are summarized in Table 2.

Step 6. [X.sup.*] = ([x.sup.*.sub.r], [x.sup.*.sub.[phi], [x.sup.*.sub.h]) = (20, 1(1/4)[pi], 5).

8. Conclusion

This paper has presented a number of challenging DPFs in location problems that have been insufficiently attempted so far. The motivation is aimed at enriching the spectrum of problems for researchers to consider and creating new and more realistic decision tools for facilities location.

For instance, when a transport mechanism with telescopic boom is used, optimal location problems are formulated as the Weber problem with metrics based on measurement of angular distance. Solution of the Weber problem with each of considered metrics is reduced to solving a problem with the rectangular metric ([l.sub.1]) or searching in a discrete set of possible locations. All algorithms run in a polynomial time. Efficiency of the proposed algorithms has been proved analytically using a numerical example.

http://dx.doi.org/10.1155/2014/701267

Conflict of Interests

The authors declare that there is no conflict of interests regarding the publication of this paper.

Acknowledgments

Lev A. Kazakovtsev, Mikhail N. Gudyma, and Alexander N. Antamoshkin gratefully acknowledge the financial support from the Ministry of Education of Russian Federation (basic part of the state assignment, Project no. 346). Predrag S. Stanimirovic gratefully acknowledges support from the Research Project 174013 of the Serbian Ministry of Science.

References

[1] R. Z. Farahani and M. Hekmatfar, Eds., Facility Location Concepts, Models, Algorithms and Case Studies, Springer, Berlin, Germany, 2009.

[2] G. O. Wesolowsky, "The Weber problem: history and perspectives," Location Science, vol. 1, pp. 5-23, 1993.

[3] P. Gonzalez-Brevis, J. Gondzio, Y. Fan et al., "Base station location optimization for minimal energy consumption in wireless networks," in Proceedings of the IEEE 73rd Vehicular Technology Conference (VTC 'll), pp. 1-5, May 2011.

[4] T. S. Hale and C. R. Moberg, "Location science research: a review," Annals of Operations Research, vol. 123, pp. 21-35, 2003.

[5] M. Kon and S. Kushimoto, "A single facility minisum location problem under the A-distance," Journal of the Operations Research Society of Japan, vol. 40, no. 1, pp. 10-20, 1997.

[6] O. R. Oniyide and I. A. Osinuga, "On the existence of best sample in simple random sampling," Journal of the Mathematical Association of Nigeria, vol. 33, no. 2B, pp. 290-294, 2006.

[7] P. J. S. G. Ferreira and P Jorge, "The existence and uniqueness of the minimum norm solution to certain linear and nonlinear problems," Signal Processing, vol. 55, no. 1, pp. 137-139, 1996.

[8] L. A. Kazakovtsev, "Adaptation of the probability changing method for Weber problem with an arbitrary metric," Facta Universitatis, Series: Mathematics and Informatics, vol. 27, no. 2, pp. 93-110, 2012.

[9] G. O. Wesolowsky, "Location problems on a sphere," Regional Science and Urban Economics, vol. 12, no. 4, pp. 495-508, 1982.

[10] P. Kolesar, W. Walker, and J. Hausner, "Determining the relation between the engine travel times and travel distances in New York City," Operations Research, vol. 23, no. 4, pp. 614-627, 1975.

[11] J. H. Walter, An empirical study of round and block norms for modeling actual distances [Ph.D. Dissertation], McMaster University, Hamilton, Canada, 1991.

[12] J. B. Westwood, "A transport planning model for primary distribution," Interfaces, vol. 8, pp. 1-10, 1977

[13] R. F. Love and J. G. Morris, "Mathematical model of road travel distances," Management Science, vol. 25, no. 2, pp. 130-139, 1979.

[14] C. S. Revelle and G. Laporte, "The plant location problem: new models and research prospects," Operations Research, vol. 44, no. 6, pp. 864-874, 1996.

[15] C. Singhtaun and P. Charnsethikul, "Comparison of exact algorithms for rectilinear distance single-source capacitated multi-facility Weber Problems," Journal of Computer Science, vol. 6, no. 2, pp. 112-116, 2010.

[16] M. Parthasarathy, T. Hale, J. Blackhurst, and M. Frank, "The three-dimensional Fermat-Weber problem with Tchebychev distances," Advanced Modeling and Optimization, vol. 8, no. 1, pp. 65-71, 2006.

[17] J. Krarup and P. M. Pruzan, "The impact of distance on location problems," European Journal of Operational Research, vol. 4, no. 4, pp. 256-269, 1980.

[18] J. Perreur and J. Thisse, "Central metrics and optimal location," Journal of Regional Science, vol. 14, no. 3, pp. 411-421, 1974.

[19] J. Ward and R. Wendell, "A new norm for measuring distance which yields linear location problem," Operations Research, vol. 28, pp. 836-844, 1980.

[20] M. Gugat and B. Pfeiffer, "Weber problems with mixed distances and regional demand," Mathematical Methods of Operations Research, vol. 66, no. 3, pp. 419-449, 2007

[21] J. Brimberg, R. Love, and N. Mladenovia, "Extension of the Weiszfeld procedure to a single facility minisum location model with mixed ip norms," Mathematical Methods of Operations Research, vol. 70, no. 2, pp. 269-283, 2009.

[22] B. Pfeiffer and K. Klamroth, "A unified model for Weber problems with continuous and network distances," Computers & Operations Research, vol. 35, no. 2, pp. 312-326, 2008.

[23] J. R. Evans and E. Minieka, Optimisation Algorithms for Network and Graphs, Marcel Dekker, New York, NY, USA, 2nd edition, 1992.

[24] F. Baroughi Bonab, R. E. Burkard, and E. Gassner, "Inverse p-median problems with variable edge lengths," Mathematical Methods of Operations Research, vol. 73, no. 2, pp. 263-280, 2011.

[25] J. Fathali and M. Zaferanieh, "Location problems in regions with and Block norms," Iranian Journal Operations Research, vol. 2, no. 2, pp. 72-87, 2011.

[26] S. Stanimirovic Predrag and C. Marija, "Discrete location problem on arbitrary surface in R3," Facta Universitatis--Series: Mathematics and Informatics, vol. 25, pp. 47-56, 2010.

[27] H. Spath, "The minisum location problem for the Jaccard metric," OR Spektrum: Quantitative Approaches in Management, no. 3, pp. 91-94, 1981.

[28] F. Chierichetti, R. Kumar, S. Pandey, and S. Vassilvitskii, "Finding the jaccard median," in Proceedings of the Twenty-First Annual ACM-SIAM Symposium on Discrete Algorithms, pp. 293-311, 2010.

[29] G. A. Watson, "An algorithm for the single facility location problem using the Jaccard metric," SIAM Journal Scientific and Statistical Computing, vol. 4, no. 4, pp. 748-756, 1983.

[30] P. S. Stanimirovic, M. S. Ciric, L. A. Kazakovtsev, and I. A. Osinuga, "Single-facility Weber location problem based on the lift metric," Facta Universitatis. Series: Mathematics and Informatics, vol. 27, no. 2, pp. 175-190, 2012.

[31] R. Klein, "Voronoi diagrams in the Moscow metric," in Graph-Theoretic Concepts in Computer Science: International Workshop WG'88 Amsterdam, The Netherlands, June 15-17, vol. 344 of Lecture Notes in Computer Science, pp. 434-444, 1989.

[32] O. Kariv and S. L. Hakimi, "An algorithmic approach to network location problems. II. The p-medians," SIAM Journal on Applied Mathematics, vol. 37, no. 3, pp. 539-560, 1979.

[33] L. Kazakovtsev, "Algorithm for approximate solution of the generalized Weber problem with an arbitrary metric," in Proceedings of the 6th UKSim/AMSS European Symposium on Computer Modeling and Simulation (EMS '12), pp. 109-114, November 2012.

[34] I. A. Osinuga, L. A. Kazakovtsev, and P. S. Stanimirovic, "Planar Weber location problem with French metro metric," Review Bulletin of the Calcutta Mathematical Society, vol. 21, no. 1, pp. 7-20, 2013.

[35] M. M. Deza and E. Deza, Encyclopedya of Distances, Springer, Berlin, Germany, 2009.

[36] P. Moon and D. E. Spencer, "Circular-cylinder coordinates (r, [psi], z)," in Field Theory Handbook, Including Coordinate Systems, Differential Equations, and Their Solutions (corrected 2nd ed.), pp. 12-17, Springer, New York, NY, USA, 1988.

[37] L. A. Kazakovtsev, "Algorithm for the location problem with non-Euclidean metric based on angular distances," Fundamental Research, vol. 9, pp. 918-923, 2012 (Russian).

[38] L. A. Kazakovtsev, P. S. Stanimirovic, and I. A. Osinuga, "Decomposition of the continuous Weber problem with French Metro metric," in Proceedings of the International Conference on Problems of Modern Agrarian Science: Collected Scientific Works, 2012, http://www.kgau.ru/new/ all/konferenc/konferenc/2012/e2.doc.

[39] L. A. Kazakovtsev and P. S. Stanimirovicc, "An approach to the multi-facility weber problem with special metrics," in Proceedings of the 7th European Modelling Symposium on Computer Modelling and Simulation (EMS '13), pp. 119-124, November 2013.

[40] R. F. Love and J. G. Morris, "A computation procedure for the exact solution of location-allocation problems with rectangular distances," Naval Research Logistics Quarterly, vol. 22, no. 3, pp. 441-453, 1975.

[41] V. A. Trubin, "An effective algorithm for the Weber problem with a rectangular metric," Otdelenie Matematiki, Mekhaniki i Kibernetiki Akademii Nauk Ukrainskoi SSR. Kibernetika, no. 6, pp. 67-70, 1978.

[42] R. Chen, "Noniterative solution of some Fermat-Weber location problems," Advances in Operations Research, vol. 2011, Article ID 379505, 10 pages, 2011.

Lev A. Kazakovtsev, (1) Predrag S. Stanimirovic, (2) Idowu A. Osinuga, (3) Mikhail N. Gudyma, (1) and Alexander N. Antamoshkin (1)

(1) Siberian State Aerospace University Named after M. F Reshetnev, Prospect Krasnoyarskiy Rabochiy 31, Krasnoyarsk 660014, Russia

(2) Faculty of Sciences and Mathematics, University of Nis, Visegradska 33, 18000 Nis, Serbia

(3) Department of Mathematics, College of Natural Sciences, Federal University of Agriculture, PMB 2240, Abeokuta, Ogun State, Nigeria Correspondence should be addressed to Lev A. Kazakovtsev; levk@bk.ru

Received 4 April 2014; Accepted 13 September 2014; Published 25 September 2014

Academic Editor: I. L. Averbakh

Table 1: Initial data. [a.sup.i. i [a.sup.i.sub.r] [a.sup.i.sub.h] sub.[phi]] [w.sub.i] 1 10 5 0 3 2 20 3 0 2 3 10 5 [pi]/4 4 4 20 5 [pi]/4 3 5 30 3 [pi]/4 4 Table 2: Solution (Steps 5.1-5.3). Step i = 2 i = 3 i = 4 i = 5 Step 5.1 value 1,25[pi] [pi] 1,25[pi] 1,25[pi] [f.sup.[phi]] ([a.sup.i.sub.[phi]] Step 5.1 condition False False False False [f.sup.[phi]] ([a.sup.i.sub.[phi]] < [f.sup.*] Step 5.1 value 1,25[pi] [pi] [pi] [pi] [f.sup.*] Step 5.1 value 0 0,25[pi] 0,25[pi] 0,25[pi] [x.sup.*.sub.[phi]] Step 5.2 value 3,75[pi] 5[pi] 6[pi] 6[pi] [f.sup.[phi]] ([a.sup.i.sub.[phi]] + [pi])) Step 5.2 condition False False False False [f.sup.[phi]] ([a.sup.i.sub.[phi]] + [pi])) < [f.sup.*] Step 5.2 value 1,25[pi] [pi] [pi] [pi] [f.sup.*] Step 5.2 value 0 0,25[pi] 0,25[pi] 0,25[pi] [x.sup.*.sub.[phi]]

Printer friendly Cite/link Email Feedback | |

Title Annotation: | Research Article |
---|---|

Author: | Kazakovtsev, Lev A.; Stanimirovic, Predrag S.; Osinuga, Idowu A.; Gudyma, Mikhail N.; Antamoshkin, A |

Publication: | Advances in Operations Research |

Article Type: | Report |

Date: | Jan 1, 2014 |

Words: | 8480 |

Previous Article: | Combining diffusion models and macroeconomic indicators with a modified genetic programming method: implementation in forecasting the number of... |

Next Article: | Multimode preemptive resource investment problem subject to due dates for activities: formulation and solution procedure. |

Topics: |